I. Product introduction and application fields
The machine tool has high economy and practicability. The machine tool adopts the horizontal lathe layout, and the numerical control system controls the horizontal (X) and vertical (Z) two-coordinate movement. Because the machine tool adopts independent spindle structure, the front and rear bearings adopt Japanese NSK precision bearings, which makes the machine tool spindle have high speed and high precision. The guide rails of the saddle and the skateboard are all roller linear guides, which have high positioning accuracy and stability. The maximum rapid traverse speed in the X and Z directions can reach 20m/min. Mainly responsible for the semi-finishing and finishing of various shaft and disc parts. It can automatically cut the inner and outer cylindrical surface, conical surface, circular surface, end surface, grooving, chamfering and other processes for various shaft and disc parts, and can turn metric straight thread, end thread and inch straight thread and Cone thread, etc., suitable for the production of multi-variety, medium and small batch products, especially for complex and high-precision parts.
Products are mainly used in home appliances and IT industries.
2. the main structural characteristics
①The machine tool adopts the traditional horizontal lathe layout. The overall design, good sealing, in line with safety standards. The main basic parts such as the bed and bed legs are made of resin sand casting, artificial aging treatment, and the stability of the whole machine is superior.
② The vertical and horizontal movement axes of the machine tool adopt semi-closed loop control system of direct drive of servo motor, precision ball screw pair, precision roller linear guide, high rigidity precision composite bearing transmission and pulse encoder position detection feedback.
③ the use of spindle servo motor, stepless speed regulation, the program can run continuously, greatly improving the processing efficiency.
④The spindle speed is high, the speed regulation range is wide, and the whole machine has low noise.
⑤ The design of the machine tool is in line with international standards, with novel and unique shape, waterproof, anti-chip and easy maintenance.
⑥ The diameter of the through hole of the main shaft is large, and it has a strong ability to pass the bar material and has a wide application range.
⑦ According to the ergonomics principle of the machine tool operating system, the control box is independent and rotated, and can be moved at any position, which is convenient for the operator to close the knife, which is the embodiment of humanized design.
⑧ The bed saddle and the slide rail adopt roller linear guide, which has fast moving speed, high precision and no crawling.
Product main technical specifications:
Specifications | TC45 | TC50 | TC58 |
Max. swing over bed | 450mm | 500mm | 580mm |
Max. turning diameter | 360mm | 500mm | 580mm |
Cutting capacity over support | Φ300mm | Φ320mm | Φ360mm |
Cutting length | 400mm | 580mm | 960mm |
Center to center | 750mm | 670mm | 1320mm |
Chuck size (hydr. Chuck) | A2-5 6” | A2-8 10” | A2-8 10” |
Main motor | 11-15kw | 15-22kw | 15-30kw |
Spindle speed | 4500rmp | 2600rmp | 2600rmp |
Spindle bore | Φ49mm | Φ87mm | Φ87mm |
Turret capacity | 8pcs | 10pcs | 12pcs |
Section of tooling tool | 20×20mm | 20×20mm | 25×25mm |
Max. boring bar length | Φ25mm | Φ25mm | Φ40mm |
Tailstock quill | Φ65mm | Φ100mm | Φ100mm |
Tailstock quill travel | 80mm | 120mm | 120mm |
Tailstock travel | 710mm | 670mm | 1250mm |
Tailstock taper | MT4 | MT5 | MT5 |
Positioning accuracy | 0.01mm | 0.01mm | 0.01mm |
Repeatability accuracy | 0.008mm | 0.008mm | 0.008mm |
Overall dimensions | 3520x2000x2100 | 3200x2100x2100 | 3620x2200x2200 |
Weight | 4000kg | 5600kg | 7000kg |
Valves
